High Poly Ns Model Pack.

CommunistWithAGun · August 2003

I'm giddy over this pack.

nthngnsd · August 2003

if u find someone willig to unwrap your guns, tell him to contact me - i need a mesher for a gun too [which aint mine and i really dun wanna mesh it o_O]

TheFrag · August 2003

this thread is in need of a bump'n. Any progress yet?

mikachu · August 2003

I just fired off an e-mail. In case that doesn't work, just PM me back or something. I should be able to skinmesh whatever you throw at me.

And nthngnsd, why would someone mesh a gun that you don't even want to mesh?

And a good note for everyone, try to remember to read before replying. We're all literate here, let's act that way.

edit: nthngnsd, just took a look at your stuff, it's pretty damn spiffy.

Also, the e-mail address is down. Hopefully this work isn't lost..

BlackPanther · August 2003

These are some pretty impressive models.
Keep up the good work!
(Although nothing will make me stop using my M41A pulse rifle <img src='http://www.unknownworlds.com/forums/html/emoticons/biggrin.gif' border='0' style='vertical-align:middle' alt='biggrin.gif'> )

TacOne · August 2003

Ooops. Page two is bad.

Bumpage

Lazer · August 2003

</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> (BlackPanther @ Aug 24 2003, 04:13 PM)</td></tr><tr><td id='QUOTE'> These are some pretty impressive models.
Keep up the good work!
(Although nothing will make me stop using my M41A pulse rifle <img src='http://www.unknownworlds.com/forums/html/emoticons/biggrin.gif' border='0' style='vertical-align:middle' alt='biggrin.gif'> )  </td></tr></table><span class='postcolor'> 
Animations need work.

Commando · August 2003

This was looking promising... will they ever be finished? Releasing them individually is probably a better idea than making a whole pack, you can make the pack afterwards anyway!

nthngnsd · August 2003

</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> (mikachu @ Aug 24 2003, 09:57 PM)</td></tr><tr><td id='QUOTE'> try to remember to read before replying ... And nthngnsd, why would someone mesh a gun that you don't even want to mesh?  </td></tr></table><span class='postcolor'> 
</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> </td></tr><tr><td id='QUOTE'></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> </td></tr><tr><td id='QUOTE'>tbh, i dont think u'll find one - i've never heard of anybody meshing someone else's models</td></tr></table><span class='postcolor'>
Jamil meshed my M8, so it does happen. It's just very rare</td></tr></table><span class='postcolor'>

TacOne · August 2003

This deserves another bump

nthngnsd · August 2003

it's E=mc² btw <img src='http://www.natural-selection.org/forums/html/emoticons/wow.gif' border='0' style='vertical-align:middle' alt='wow.gif'>

Dubbilex · August 2003

yes god. Oh god please get this released. <i>Pleeeeaaaase</i>!?

TacOne · August 2003

I dunno how to make them small letters.
I could make it E=MC^2, though

Kaine · August 2003

getting a little OT for this topic, but i LOVE that pistol.

nthngnsd · August 2003

oh that's pretty easy, simply grab your left hand with your right hand and then pull it away from the shift key

FLAwLeSSCyrus · August 2003

I WANT THE MODEL ALREADY I NEED TO HAVE IT

Its just so beautiful i can't wait hurry and skin it to perfection!

TheFrag · August 2003

progress? THIS MUST NOT DIE!

Mr_Shoe · August 2003

I think it died before it could even be saved.

Spydr-modeler · August 2003

No it isn't dead, I'm still wanting to make the high poly models if I could get a mesher and player modeler.

mikachu · August 2003

Hi. I'm offering to mesh. Send me a PM. I would send you an example mesh, but it's for a mod so. Right.

Edit: You might also want to check the status of your e-mail account. I'm not sure if it's working properly or not now but a while back I sent an e-mail.. Came back negative.

Surge · August 2003

Guys, shouting "I want release" in all-caps doesn't help.... unless the guy says "Hey say this and I'll release."

mikachu · September 2003

*bump*

I have offered to mesh, Aka'lamanaia has offered to "take a stab", Selbstmord has offered to mesh. The posts are on pages 12 and 14. The player modeller can wait, I would think.

Edit: in response to below, Spydr-modeller replied just 3 posts above yours. No funeral just yet.

PoisonTheWell · September 2003

*pulls out the paper*
*flips throught to obituaries*
On September 1st The High Poly Ns Model Pack has been pronounced DEAD after trying to be saved by many meshers (mikachu, Aka'lamanaia, Selbstmord), the packs struggling has been put to rest. A wak shall be held on the Second at Hera.

<span style='font-size:14pt;line-height:100%'><u><b>SHE'S DEAD!!!</b></u></span>

Windburn · September 2003

you looked at the wrong obituary you illiterate ****.

this is still alive and kicking- slow and steady wins the race, as they say.
let's see this come back together, because they are too sexy to leave on the line for too long <img src='http://www.unknownworlds.com/forums/html/emoticons/tounge.gif' border='0' style='vertical-align:middle' alt='tounge.gif'>

Rellix · September 2003

Im pretty sure he wants you to PM to do the mesh.

HKK · September 2003

</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> (PoisonTheWell @ Sep 1 2003, 06:57 PM)</td></tr><tr><td id='QUOTE'> *pulls out the paper*
*flips throught to obituaries*
On September 1st The High Poly Ns Model Pack has been pronounced DEAD after trying to be saved by many meshers (mikachu, Aka'lamanaia, Selbstmord), the packs struggling has been put to rest. A wak shall be held on the Second at Hera.

<span style='font-size:14pt;line-height:100%'><u><b>SHE'S DEAD!!!</b></u></span>  </td></tr></table><span class='postcolor'> 
You know nothing. <img src='http://www.unknownworlds.com/forums/html/emoticons/wink.gif' border='0' style='vertical-align:middle' alt='wink.gif'>

Selbstmord · September 2003

Meshing stuff made in Max is not really easy, but I'll definately have a go at this if Spydr doesn't mind

MetalHeart · September 2003

I hope this won't die....many rockin' ppl work on it....it must see day light.....i hope.....
I believe in you boys....I love you ? hmmm <img src='http://www.unknownworlds.com/forums/html/emoticons/tounge.gif' border='0' style='vertical-align:middle' alt='tounge.gif'>

nthngnsd · September 2003

what's the problem anyway? <img src='http://www.unknownworlds.com/forums/html/emoticons/confused.gif' border='0' style='vertical-align:middle' alt='confused.gif'>
i thought he's already got a mesher <img src='http://www.unknownworlds.com/forums/html/emoticons/wow.gif' border='0' style='vertical-align:middle' alt='wow.gif'>

Nottingham · September 2003

</span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> (nthngnsd @ Sep 2 2003, 06:50 AM)</td></tr><tr><td id='QUOTE'> what's the problem anyway? <img src='http://www.unknownworlds.com/forums/html/emoticons/confused.gif' border='0' style='vertical-align:middle' alt='confused.gif'>
i thought he's already got a mesher <img src='http://www.unknownworlds.com/forums/html/emoticons/wow.gif' border='0' style='vertical-align:middle' alt='wow.gif'>  </td></tr></table><span class='postcolor'> 
Yeah... lots of people have been willing to help.. dont understand what the problem is...

High Poly Ns Model Pack.

Comments