Thermal generator, nuclear reactor and mercury ore.
YolDovah
Boreville Join Date: 2017-02-14 Member: 227924Members
Boreville Join Date: 2017-02-14 Member: 227924Members
Ok first of all just how long does it take the TG to produce power as i put 8 in a geyser near the kelp fields in the safe shallows but i had no power so justy how do i get them to work.
Also same with the nuclear reactor ive built 4 in a base just at the entrance of the lost river but no power even though they each have 4 rods in them.
As for mercury ore what is it used for if anything at the moment.
Also same with the nuclear reactor ive built 4 in a base just at the entrance of the lost river but no power even though they each have 4 rods in them.
As for mercury ore what is it used for if anything at the moment.
Comments
Move very close to each unit without a tool in hand.
If one or 2 don't have a full charge move them closer and monitor the charge.
If the charge doesn't top out readjust the position. Use a Power Extender.
The extender will show a line to each unit as you move the extender closer to your base.
As for the Nucs, they deplete the rods faster in Survival mode.
I haven't used one yet. You can check the charge on these as well.
If the status screen reads 'Active' it should be suppling power.
The Nuc uses 1 rod at a time. Charge build up is slow.
Use a Rad Suit to remove depleted rods.
For us and PCs Mercury and Nickel aren't implemented. Yet, as far as I Know.
I checked the SN Wiki last month Jan 17.