ghetto riggin
SloppyKisses
omgawd a furreh!Virginia Join Date: 2003-07-05 Member: 17942Members, Constellation
<div class="IPBDescription">CPU PSU for CB Radio</div>So i have this old cb radio i wanted to hook up to my computers PSU. The question is which 2 wires do i use from the PSU?
I was told from a friend to use the yellow and black one.. if this is the truth and case, which black one do i use seeing there are 2 black wires.
My first guess was id be using one of the red and black ones considering i thought red was positive? but then again i dont know how a cpu PSU even works with its 4 wires lol.
help priciated kthx
nvm this answered my question
Pin Wire Color Signal
1 Yellow +12v
2 Black Ground
3 Black Ground
4 Red +5v
lawl google ftw
ill report back later if i r burnt house down keke
I was told from a friend to use the yellow and black one.. if this is the truth and case, which black one do i use seeing there are 2 black wires.
My first guess was id be using one of the red and black ones considering i thought red was positive? but then again i dont know how a cpu PSU even works with its 4 wires lol.
help priciated kthx
nvm this answered my question
Pin Wire Color Signal
1 Yellow +12v
2 Black Ground
3 Black Ground
4 Red +5v
lawl google ftw
ill report back later if i r burnt house down keke
Comments
Also, you can get +7 volts if you use the +12 volt cable as positive, and the +5 volt cable as the ground.
and i got it, works great. Im possibly the only retard with a cb radio hooked into his computer with a atenna mounted to the side of my house just outside my window lol
--Scythe--
And... what's your handle good buddy?
<!--QuoteEnd--></div><!--QuoteEEnd-->
haha i dunno yet :/
I'm trying to think of something annoying but at the same time almost like purepwnage leet to annoy the hell out of everyone..
Update: I bought a 100 foot antenna pole setup. along with 200 dollar high powered Liner amp
time to interfere with peoples digital cable as they here my annoying voice through their tv screens. woot.
On a second note, i had to grab a second psu to power that too lol.
edit: im now trying to modify the liner to fit inside one of the disk drive bays for my cpu also. If i get it too and setup everything properly ill be sure to post screenshots of it being super geeky and retardly completed lol