Amd And Redhat
Virgil
Join Date: 2003-02-11 Member: 13434Members
<div class="IPBDescription">Problems....LOTS</div> I am experiencing lots of problems with running a redhat machine, with an amd processor, I was wondering how many admins, are experiencing the same types of problems. It ran great for like I am running redhat 8, but I have experienced the same types of problems on 7.2. It starts crashing and freezing the machine into a pure deadlock. SO I am for the moment switching to slack, but I wanted to see if the prob is not only with a prob of the OS, but maybe how the OS and the hardware interact. But I am running a AMD 2100+ server.
Specs:
2100+ AMD
Soyo Dragon KT 400 Black
2100DDR 256 megs of ram
Matrox Video Card
RedHat 8.0
If you have any suggestions drop me an email at virgil@flatline-server.com
Specs:
2100+ AMD
Soyo Dragon KT 400 Black
2100DDR 256 megs of ram
Matrox Video Card
RedHat 8.0
If you have any suggestions drop me an email at virgil@flatline-server.com
Comments
was it kernel panics or just loss of response?
[os! Linux 2.4.18-14][uptime! 36d 23h 59m][cpu! GenuineIntel Intel® Pentium® 4 CPU 2.40GHz, 2400MHz][disk! / (19GB Free, 26GB Total), /boot (84MB Free, 94MB Total), /dev/shm (235MB Free, 235MB Total)][ram! Usage: 311/472MB (65.89%)][network! (lo Interface: 71Mb In, 71Mb Out) (eth0 Interface: 1Gb In, 3Gb Out)][load! 1.62 1.60 1.44]
how are you running HLDS? is it inside a screen? Do you have alot of MM plugins?
I have a ton on MM plugins including AMX. It takes like 3 minutes for it to load (i have noo idea why though). then the usual time for the map and cvars....
but my SSH still is working. I run a amdxp 2000+ on a ECS mobo.
what kernel are you running? i had problems with release 24.8.0...so i rolled back to 18.8.0
good luck
temperature
memory (swap in some other sticks. Bad memory is fairly common)
power supply (low/high voltage on a line can freak out a mobo. Swap a new one in and test)
Details:
Redhat 8.0
AMD 2400 XP+ with 512 ddr ram
cheap graphics card
100 Mbit connection