Mwip- Morita Carbine

TalShiarTalShiar Join Date: 2002-11-09 Member: 7953Members
Basically its a morita rifle, except with the front chopped off and minus the shotgun. I believe it will probably fit nicely with the smg since its a bit comparable in size. I was rather free with the polygonsin that i put in the depressions etc, and i beveled alot of faces. It therefore ended up at around 1500 polygons. Tell me what yall think.

<img src='http://www.boomspeed.com/tal_shiar/carbinel.jpg' border='0' alt='user posted image'>
«134

Comments

  • Kusanagi-samaKusanagi-sama Join Date: 2003-01-06 Member: 11920Members
    very nice ^^ keep working and relase
  • KamakazieKamakazie Join Date: 2002-11-25 Member: 9958Members
    Nice <!--emo&:D--><img src='http://www.unknownworlds.com/forums/html/emoticons/biggrin.gif' border='0' valign='absmiddle' alt='biggrin.gif'><!--endemo-->
  • TalShiarTalShiar Join Date: 2002-11-09 Member: 7953Members
    Ok, its always bothered me there is no visible sights on the morita, i mean how are they supposed to aim? So ive considered adding any number of modifications to it.

    My favorite ideas sofar is - ACOG scope on handle, Long rifle scope (think m-24 type), or modify it to look something like an m16 sights/famas(you know, the middle of the handle is depressed a bit with the sights within. Which do yall think would look best? ill try a few and post a few renders later.

    Btw - anyone have any good refs of the left side of the rifle? i cant figure out what goes across from the ejection port.
  • WindelkronWindelkron Join Date: 2002-04-11 Member: 419Members
    when you make this, can you put the viewport a little towards the center? I didn't like the other morita model becuase it was held out so far to the right.
  • golden_eyegolden_eye Join Date: 2002-11-01 Member: 3425Members
    Wow, looking great so far
  • jimbobjimbob Join Date: 2002-11-15 Member: 8824Members
    that looks so much like an SA 80 it's unreal, nice, could you make it thicker looking than the stander mortia which was released, that looked far too thin
  • TalShiarTalShiar Join Date: 2002-11-09 Member: 7953Members
    the gun is smaller than the normal morita so i should be able to make it a bit bulkier.
  • TalShiarTalShiar Join Date: 2002-11-09 Member: 7953Members
    Ok heres a morita with a makeshift scope on it, ill probably revise it a little in the end but i wanted to see how it looked first.

    oh, and i could definately used help in the meshing/skinning department.
  • Silver_FoxSilver_Fox Spammer Join Date: 2002-01-24 Member: 34Members, NS1 Playtester, Contributor
    I'll skin that one too ...

    ^_^

    but I recommend adding the holes in the barrel, its not supposed to be completly solid...
  • YardbombYardbomb Join Date: 2002-11-24 Member: 9791Members
    I like it alot <!--emo&:D--><img src='http://www.unknownworlds.com/forums/html/emoticons/biggrin.gif' border='0' valign='absmiddle' alt='biggrin.gif'><!--endemo-->
  • SickleSickle Join Date: 2003-01-02 Member: 11713Members
    yes it is a very nice model...i agree put holes in the muzzel cuz it would look like a baby carrot with out it and please realease soon and plz make an hmg model cuz my and everyone else wants it in hmg!!! <!--emo&:D--><img src='http://www.unknownworlds.com/forums/html/emoticons/biggrin.gif' border='0' valign='absmiddle' alt='biggrin.gif'><!--endemo-->
  • VashVash Join Date: 2002-11-12 Member: 8333Members
    Damn, forget the skin, just leave it like that, looks great, LoL
  • CaptainPanakaCaptainPanaka Join Date: 2002-11-02 Member: 4718Members
    <!--QuoteBegin--Kamakazie+Jan 20 2003, 05:22 AM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> (Kamakazie @ Jan 20 2003, 05:22 AM)</td></tr><tr><td id='QUOTE'><!--QuoteEBegin-->Nice <!--emo&:D--><img src='http://www.unknownworlds.com/forums/html/emoticons/biggrin.gif' border='0' valign='absmiddle' alt='biggrin.gif'><!--endemo--><!--QuoteEnd--></td></tr></table><span class='postcolor'><!--QuoteEEnd-->
    ....! <!--emo&:0--><img src='http://www.unknownworlds.com/forums/html/emoticons/wow.gif' border='0' valign='absmiddle' alt='wow.gif'><!--endemo-->
  • TalShiarTalShiar Join Date: 2002-11-09 Member: 7953Members
    edited January 2003
    Ok heres what im thinking of as final version of the model, the scope bounced the polycount up a bit. I still cant figure out what goes on the left side of the thing across from the ejection port, if anyone knows plz tell me. Silver Fox has volonteered to skin the thing so ill focus on meshing it over the next week, it probably can use the same animations as the normal morita.

    edit- i also thought it might be cool to get a custom muzzle flash to go with this one, more like a 6 pronged flash instead of the circular kind. would any sprite people be interested in such a project?
  • FacTorFacTor Wyoming, MI Join Date: 2002-12-17 Member: 10916Members
    hmm..nice, now were gonna have 3 of this gun though
  • SickleSickle Join Date: 2003-01-02 Member: 11713Members
    yeah but this one is the best of the 3 and it is also phucking pimp with that boss scope
  • Majestic12Majestic12 Join Date: 2003-01-21 Member: 12533Members
    edited January 2003
    yeah sounds good mate I love it cant wait for you to get it ready to be used but may I make a suggestion tal id make a black one as well and one without the scope cause we all know someone will ask you to do it so may as well do it sooner rather than later hey mate.

    <!--emo&::asrifle::--><img src='http://www.unknownworlds.com/forums/html/emoticons/asrifle.gif' border='0' valign='absmiddle' alt='asrifle.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo-->
    "ONOS!!!!!!!!! FRAG IT"-Majestic12 2 seconds before onos totaly destoroyed him and 7 others <!--emo&:angry:--><img src='http://www.unknownworlds.com/forums/html/emoticons/mad.gif' border='0' valign='absmiddle' alt='mad.gif'><!--endemo-->
  • Majestic12Majestic12 Join Date: 2003-01-21 Member: 12533Members
    Oh also tal for a sound somethin along the lines of the lmg sound about that deep and loud but not the same and I like the flash idea alot

    <!--emo&::asrifle::--><img src='http://www.unknownworlds.com/forums/html/emoticons/asrifle.gif' border='0' valign='absmiddle' alt='asrifle.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo--> <!--emo&::onos::--><img src='http://www.unknownworlds.com/forums/html/emoticons/tiny.gif' border='0' valign='absmiddle' alt='tiny.gif'><!--endemo-->

    "AHAHAHAHAHAHA COME GET SOME BANG BANG BANG BANG BANG BANG BANG BANG BANG BANG BANG BANG * click*..............oh no"
  • Silver_FoxSilver_Fox Spammer Join Date: 2002-01-24 Member: 34Members, NS1 Playtester, Contributor
    <!--QuoteBegin--TalShiar+Jan 21 2003, 01:06 AM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> (TalShiar @ Jan 21 2003, 01:06 AM)</td></tr><tr><td id='QUOTE'><!--QuoteEBegin-->I still cant figure out what goes on the left side of the thing across from the ejection port, if anyone knows plz tell me.<!--QuoteEnd--></td></tr></table><span class='postcolor'><!--QuoteEEnd-->
    <img src='http://www.goldenarmor.com/weapons/marineg.jpg' border='0' alt='user posted image'>
  • VashVash Join Date: 2002-11-12 Member: 8333Members
    <!--QuoteBegin--TalShiar+Jan 20 2003, 11:06 PM--></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> (TalShiar @ Jan 20 2003, 11:06 PM)</td></tr><tr><td id='QUOTE'><!--QuoteEBegin-->edit- i also thought it might be cool to get a custom muzzle flash to go with this one, more like a 6 pronged flash instead of the circular kind.   would any sprite people be interested in such a project?<!--QuoteEnd--></td></tr></table><span class='postcolor'><!--QuoteEEnd-->
    I could try and make one...I'll see what i can do.
  • AssassinGTAssassinGT Join Date: 2002-11-07 Member: 7498Members
    edited January 2003
    Perhaps I'll skin it. I'm not terribly busy right now. I'm still a little sceptical about that clip, but meh. If theres smoothing errors I'll have them hidden and fixed in no time.
  • KaineKaine Join Date: 2002-08-07 Member: 1096Members, Constellation
    I don't like the scope.

    there. i said it.
  • SickleSickle Join Date: 2003-01-02 Member: 11713Members
    edited January 2003
    "but may I make a suggestion tal id make a black one as well and one without the scope cause we all know someone will ask you to do it so may as well do it sooner rather than later hey mate."

    i agree
  • TalShiarTalShiar Join Date: 2002-11-09 Member: 7953Members
    Ok, heres how i hope this schedual to work - i hope by the end of this coming weekend to have it meshed, scope and all. Afterwards ill hand the meshes out to silver fox and whoever else wants to take a shot at it. Meanwhile ill send the meshes to an animator (or better yet, i can probably use the ones for the current morita) This step, considering the efficiency that i have seen in the past, should take another week. After that it only remains to get the material together (sounds, and i really hope that vash can make a muzzle flash) so i estimate 2 weeks until preliminary release and then ill probably release some p and v models later. First release i hope to have at least 3 versions, scoped, nonscoped and dark/light skins (this is also subject to change, depends on what the skins look like i suppose)
  • jimbobjimbob Join Date: 2002-11-15 Member: 8824Members
    2 weeks <!--emo&???--><img src='http://www.unknownworlds.com/forums/html/emoticons/confused.gif' border='0' valign='absmiddle' alt='confused.gif'><!--endemo--> oh well......................................................................................................... /me twidles thumbs.
  • Wolf_KahlerWolf_Kahler Join Date: 2002-11-29 Member: 10252Members
    Yes, jimbob. Two weeks.
  • s_viper3s_viper3 Join Date: 2003-01-16 Member: 12363Members
    Lol that is an awesome gun. Release it without a skin (just that greyness). Id love to use it like that. Very sharp
  • Kusanagi-samaKusanagi-sama Join Date: 2003-01-06 Member: 11920Members
    hell i agree with that. . .looks smooth
  • TalShiarTalShiar Join Date: 2002-11-09 Member: 7953Members
    heh, no matter how good of a model it is it looks like **** ingame without a proper skin. i guarantee youll be much happier with a well done finished project than a rushed release with no skin. <!--emo&:)--><img src='http://www.unknownworlds.com/forums/html/emoticons/smile.gif' border='0' valign='absmiddle' alt='smile.gif'><!--endemo-->
  • Kusanagi-samaKusanagi-sama Join Date: 2003-01-06 Member: 11920Members
    then add more renders or in-game screenies for pepole's pleasure
Sign In or Register to comment.