Having trouble with vertical corridors. I can put them onto my base from outside, but then they do not open up inside, and I cannot place ladders. Any help?
Not sure if you are missing a step, but I will explain them. So you have a tube on the sea floor. Then you use a couple vertical connectors on the top of the tube. Place another tube section on top of the connector. enter either top or bottom tube and build a ladder inside the tube where the connector is. Ladder has to be placed while inside the tube section.
you also can't make an observatory on top of a vertical connector, or the big round room, which sucks because those are the only two rooms I actually want to use vertical connectors on
Not sure if you are missing a step, but I will explain them. So you have a tube on the sea floor. Then you use a couple vertical connectors on the top of the tube. Place another tube section on top of the connector. enter either top or bottom tube and build a ladder inside the tube where the connector is. Ladder has to be placed while inside the tube section.
That's exactly what I've done! But the tube does not open into the connectors. From the insides, you'd never know the vertical tube was there.
that is correct. once the verticle connectors are in place, select ladder from the build menu and point at the floor or roof(which ever is connected to the vert) and build a ladder. the verts dont make ladders. they are just a connecting tube. they do not open until you add a ladder to them.
Comments
That's exactly what I've done! But the tube does not open into the connectors. From the insides, you'd never know the vertical tube was there.