I've just installed the speech, my only problem is a way to confirm that it's locked without an auditory feedback, in other words, just change the icon in the systray to something with a crossed out circle, it sometimes goes active just from my cheek scraping the mic, I'll change the required voice to assist there but I'd still like a visual notifier.
edit: and a bug: it seems that if you define more than one term to a command, the initializer crashes.
edit: bug: speech occasionally sets the song to the beginning even when the thing is locked, in fact just now it did it again and then stopped, and it is still locked. It seems to do this more when minimized to the systray, I'll minimize it to the taskbar and see if it continues
edit: continues just as much. but now it's unlocking, I've pulled the mic away... strange
<!--QuoteBegin--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> </td></tr><tr><td id='QUOTE'><!--QuoteEBegin-->I've just installed the speech, my only problem is a way to confirm that it's locked without an auditory feedback, in other words, just change the icon in the systray to something with a crossed out circle, it sometimes goes active just from my cheek scraping the mic, I'll change the required voice to assist there but I'd still like a visual notifier. <!--QuoteEnd--></td></tr></table><div class='postcolor'><!--QuoteEEnd--> Good idea. Ill make a small update with that, and the other stuff I have completed so far, for immidiate use.
<!--QuoteBegin--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> </td></tr><tr><td id='QUOTE'><!--QuoteEBegin--> it seems that if you define more than one term to a command, the initializer crashes. ---- speech occasionally sets the song to the beginning even when the thing is locked, in fact just now it did it again and then stopped, and it is still locked. It seems to do this more when minimized to the systray, I'll minimize it to the taskbar and see if it continues <!--QuoteEnd--></td></tr></table><div class='postcolor'><!--QuoteEEnd--> I've never had any problems with that. Ill dig some and see what I can find. In fact, I should encourage you to use several words, to prevent faulty recognitions. To prevent it from accidently recognizing commands, use the controlpanels speech controls to increase sensitivity, and do more training sessions. Short terms seems to mistakenly get recognized quite often if you don't.
When you add commands and the engine is locked, you need to re-lock it, since it rebuilds grammar and sets the normal rule active, making the SR engine un-locked. The feedback for this is not very good.. I'll try work something out.
<!--QuoteBegin--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> </td></tr><tr><td id='QUOTE'><!--QuoteEBegin--> ever think about developing for foobar? <!--QuoteEnd--></td></tr></table><div class='postcolor'><!--QuoteEEnd--> One of the reasons I separated the "command-sending" class to its own DLL, is to make the plugins work for other applications as well. I intended to make control-DLLs for the most common players, like foobar, media player classic, wmp, iTunes and so on. This will, however, take some time. And as I said before, I kinda stopped developing this because it did all that I wanted it to do <!--emo&:)--><img src='http://www.unknownworlds.com/forums/html//emoticons/smile.gif' border='0' style='vertical-align:middle' alt='smile.gif' /><!--endemo-->
Since there still seems to be an interest in the project, Ill start working on it again. I seem to be at a loss regarding the repeat/shuffle issue. Ill just remove those from the DLL.
Thanks for the feedback. Ill edit here when I'm done with the update. /RexM
edit: Update completed (I hope). Grab it at <a href='http://hem.bredband.net/rexm/WinampRexM.exe' target='_blank'>the usual place</a>. edit: Small bugfix. Fixed crash when selecting no to updating an edited command. Thanks to Gwahir for finding that one. Installer is updated at the link above.
Comments
edit: and a bug: it seems that if you define more than one term to a command, the initializer crashes.
edit: bug: speech occasionally sets the song to the beginning even when the thing is locked, in fact just now it did it again and then stopped, and it is still locked. It seems to do this more when minimized to the systray, I'll minimize it to the taskbar and see if it continues
edit: continues just as much. but now it's unlocking, I've pulled the mic away... strange
<!--QuoteEnd--></td></tr></table><div class='postcolor'><!--QuoteEEnd-->
Good idea. Ill make a small update with that, and the other stuff I have completed so far, for immidiate use.
<!--QuoteBegin--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> </td></tr><tr><td id='QUOTE'><!--QuoteEBegin-->
it seems that if you define more than one term to a command, the initializer crashes.
----
speech occasionally sets the song to the beginning even when the thing is locked, in fact just now it did it again and then stopped, and it is still locked. It seems to do this more when minimized to the systray, I'll minimize it to the taskbar and see if it continues
<!--QuoteEnd--></td></tr></table><div class='postcolor'><!--QuoteEEnd-->
I've never had any problems with that. Ill dig some and see what I can find. In fact, I should encourage you to use several words, to prevent faulty recognitions.
To prevent it from accidently recognizing commands, use the controlpanels speech controls to increase sensitivity, and do more training sessions. Short terms seems to mistakenly get recognized quite often if you don't.
When you add commands and the engine is locked, you need to re-lock it, since it rebuilds grammar and sets the normal rule active, making the SR engine un-locked. The feedback for this is not very good.. I'll try work something out.
<!--QuoteBegin--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><b>QUOTE</b> </td></tr><tr><td id='QUOTE'><!--QuoteEBegin-->
ever think about developing for foobar?
<!--QuoteEnd--></td></tr></table><div class='postcolor'><!--QuoteEEnd-->
One of the reasons I separated the "command-sending" class to its own DLL, is to make the plugins work for other applications as well. I intended to make control-DLLs for the most common players, like foobar, media player classic, wmp, iTunes and so on. This will, however, take some time. And as I said before, I kinda stopped developing this because it did all that I wanted it to do <!--emo&:)--><img src='http://www.unknownworlds.com/forums/html//emoticons/smile.gif' border='0' style='vertical-align:middle' alt='smile.gif' /><!--endemo-->
Since there still seems to be an interest in the project, Ill start working on it again.
I seem to be at a loss regarding the repeat/shuffle issue. Ill just remove those from the DLL.
Thanks for the feedback. Ill edit here when I'm done with the update.
/RexM
edit: Update completed (I hope). Grab it at <a href='http://hem.bredband.net/rexm/WinampRexM.exe' target='_blank'>the usual place</a>.
edit: Small bugfix. Fixed crash when selecting no to updating an edited command.
Thanks to Gwahir for finding that one. Installer is updated at the link above.